
Lanberg Ethernet Adapter Wireless Network Card NC-0150-WE

Availability:
Available
Dispatched within: 5-7 working days
Bradas Cable Tie, white, 7.6x550 mm, 100-pack

Availability:
Available
Dispatched within: 5-7 working days
TB Lightning - USB Cable MFi 1.5m, silver

Availability:
Available
Dispatched within: 5-7 working days
Bradas Cable Tie, black, 7.6x550mm, 100-pack

Availability:
Available
Dispatched within: 5-7 working days
Adapter USB- 1xRS-232 + Adapter DB9F/DB25M Y-105A

Unitek Y-105A USB converter 1xRS-232 with the adapter
Converter USB to Serial RS-232
Serial port (RS-232) on the USB bus + adapter 9 pin to 25 pin
• compatible with USB 1.1,
• chipset Prolific PL-2303,
• RS-232 DB9M
• Integrated USB cable with a length of 140cm,
• adapter included RS-232 9 pin to 25 pin
Converter designed especially for computers without a serial port, for example. newest notebooks. It is compatible with RS-232, however, may not work with devices whose software:
• requires the IRQ identification
• refers directly to the controller COM port (UART).
Note! The device creates a serial port RS-232 USB port (not the other way around).
The converter is compatible with Windows 98, ME, 2000, XP, Server2003 (32 & 64-bit), Vista (32 & 64-bit), 7 (32 & 64-bit), Server2008 (32 & 64-bit) and Linux 2.4+.
Availability:
Out of stock
Gembird Cable Displayport(M) -> DVI-D(24+1) 3M

Availability:
Available
Dispatched within: 5-7 working days
LogiLink Displayport Cable 4K/60 Hz DP/M to DP/M 5 m

Availability:
Low Stock
Dispatched within: 5-7 working days
Lanberg Cable VGA Ferrite 15M M/M Shield black

Availability:
Available
Dispatched within: 5-7 working days
TP-Link Nano Wireless USB Adapter Archer T2U AC600

Availability:
Available
Dispatched within: 5-7 working days
Cable Cover Strip LPO 15x50 mm, cemi-circular, grey

Availability:
Available
Dispatched within: 5-7 working days
AXAGON USB Cable BUCM32-CM15AB cable USB-C USB-C USB3.2 Gen2 1.

Availability:
Available
Dispatched within: 5-7 working days
LogiLink Cable Ties Set 600pcs with Wire Stripper

Colour cable tie set
- Cable ties
- Wire stripper
- Length: 2.5 x 100mm; Colour: Red/White
Each colour 100, total 200pcs.
- Length: 3.6 x 150mm; Colour: White/Yellow
Each colour 50, total 100pcs.
- Length: 3.6 x 180mm; Colour: Black/Blue
Each colour 50, total 100pcs.
- Length: 3.6 x 200mm; Colour: Green/White
Each colour 50, total 100pcs.
- Length: 4.8 x 230mm; Colour: Black/White
Each colour 50, total 100pcs.
Availability:
Low Stock
Dispatched within: 5-7 working days
LogiLink DisplayPort Cable 1.2 to HDMI 1.4 1 m, black

Availability:
Available
Dispatched within: 5-7 working days
MCE151 remote control-programmable remote control + remote control battery

Maclean MCE151 remote control jack in 1pcs - programmable + remote control battery
The devices needed in today's times where the popular topic is energy saving. The purpose of the sockets with remote control is to support home appliances such as lamps, fans, other electrical equipment.
In addition, the sockets allow you to switch off appliances that use energy (RTV, household appliances) even during sleep.
PROGRAMMING:
- Open the remote control cover and place two AAA 1.5V batteries in the middle. Then press On / Off to see if it works. If the LED on the remote control turns on, the batteries are working properly.
Plug in the socket, the LED indicator will blink. Enter the channel selection mode on the remote control. Note: The socket will exit the channel selection mode after 29 seconds of inactivity.
- On the remote control, press A-On, B-ON, C-ON or D-ON to match the socket. When properly connected, the LED stops blinking. Done - you can now turn the socket on or off by pressing ON / OFF.
- Deleting a single channel: Disconnect and re-connect the power outlet (the LED will flash slowly in the channel selection mode). Then press and hold the OFF button until the LED flashes quickly (about 3-4 seconds), which means that the selected channel has been deleted. After clearing the channel, the receiver returns to the selection mode. Total time for channel selection is 29 seconds.
Remove all the selected channels: Disconnect the power socket and reconnect (the LED will flash slowly in the channel selection mode) then press and hold the OFF 'ALL ON / OFF' button until the LED flashes rapidly (about 3-4 seconds) This will mean that all selected ON / OFF channels have been removed. After all, the led will stop blinking.
Main features:
- Remote control socket 1 piece programmable + remote control + remote control battery
- Power supply: 230V, 50Hz
- Maximum load: 16 (2) A, 3600W
- Frequency of operation: 433.92MHz
- Range: about 30m in open space
- Remote control batteries: 2 AAA 1.5V (included)
Availability:
Available
Dispatched within: 5-7 working days