
AXAGON USB Cable BUCM32-CM15AB cable USB-C USB-C USB3.2 Gen2 1.

Availability:
Available
Dispatched within: 5-7 working days
LogiLink Cable Ties Set 600pcs with Wire Stripper

Colour cable tie set
- Cable ties
- Wire stripper
- Length: 2.5 x 100mm; Colour: Red/White
Each colour 100, total 200pcs.
- Length: 3.6 x 150mm; Colour: White/Yellow
Each colour 50, total 100pcs.
- Length: 3.6 x 180mm; Colour: Black/Blue
Each colour 50, total 100pcs.
- Length: 3.6 x 200mm; Colour: Green/White
Each colour 50, total 100pcs.
- Length: 4.8 x 230mm; Colour: Black/White
Each colour 50, total 100pcs.
Availability:
Low Stock
Dispatched within: 5-7 working days
LogiLink Displayport Cable 4K/60 Hz DP/M to DP/M 5 m

Availability:
Low Stock
Dispatched within: 5-7 working days
Varta Battery Zinc-manganese V23GA 52mAh

Availability:
Low Stock
Dispatched within: 5-7 working days
Legrand Extension Cable Standard EU 3x2P+Z 3m, white/grey

Availability:
Low Stock
Dispatched within: 5-7 working days
USB 3.0 Metal 4-port Passive USB HUB, 4x port USB 3.0

USB 3.0 Metal 4-port passive USB HUB, 4x USB 3.0 port
i-tec USB 3.0 HUB is the perfect companion for everyone who does not have enough USB ports in their notebook, ultrabook or PC, and for those who have to constantly disconnect and connect their favorite devices, such as a USB flash drive, tablet, digital camera, MP3 player, printer, etc.
This HUB offers 4 USB 3.0 ports with Plug & Play function and standard USB charging - HUB will automatically detect connected USB charging devices.
The USB 3.0 interface is mainly important when transferring data from USB 3.0 memory cards and flash drives that use the highest transfer speed. The LED indicates the read and write status of the data. HUB is powered from the USB bus and does not require installation of drivers. Just connect it with a USB-C cable and it's ready to use right away. It has built-in overcurrent protection to protect your computer in case of a short circuit in connected peripheral devices. The interface is compatible with USB 2.0, works without a power supply, which is not required for most equipment, and thanks to its small size and light weight, you can take it with you wherever you like.
- i-tec USB 3.0 Metal 4-port HUB passive with built-in USB cable (20cm)
- User's guide
96 x 30 x 21mm
- USB charging detection mechanism for mobile devices
- Plug & Play function
- Led
- Overcurrent and overload protection
- 1x built-in USB 3.0 cable for connecting the HUB to a notebook, tablet or computer
Availability:
Available
Dispatched within: 5-7 working days
Cable shielding strip 1.5m 43 * 23 MM white MTCV-575 with tape

Cable strip cover 1.5m 43 * 23MM white Maclean MCTV-575 with tape
A masking strip with which you can aesthetically hide the wires connecting the AV equipment. The strip is two-piece, can be fixed to the wall with double-sided tape (included). Strip made of high strength plastic. You can cut the strip yourself to the right length!
Main features:
- Strip length: 150cm
- Width: 43mm
- Height: 23-32mm
- Very easy and fast assembly of cables
- White colour
- Material: durable plastic
- 2 year manufacturer's warranty
- Width: 43cm
- Height: 23-32mm
Availability:
Available
Dispatched within: 5-7 working days
MCE151 remote control-programmable remote control + remote control battery

Maclean MCE151 remote control jack in 1pcs - programmable + remote control battery
The devices needed in today's times where the popular topic is energy saving. The purpose of the sockets with remote control is to support home appliances such as lamps, fans, other electrical equipment.
In addition, the sockets allow you to switch off appliances that use energy (RTV, household appliances) even during sleep.
PROGRAMMING:
- Open the remote control cover and place two AAA 1.5V batteries in the middle. Then press On / Off to see if it works. If the LED on the remote control turns on, the batteries are working properly.
Plug in the socket, the LED indicator will blink. Enter the channel selection mode on the remote control. Note: The socket will exit the channel selection mode after 29 seconds of inactivity.
- On the remote control, press A-On, B-ON, C-ON or D-ON to match the socket. When properly connected, the LED stops blinking. Done - you can now turn the socket on or off by pressing ON / OFF.
- Deleting a single channel: Disconnect and re-connect the power outlet (the LED will flash slowly in the channel selection mode). Then press and hold the OFF button until the LED flashes quickly (about 3-4 seconds), which means that the selected channel has been deleted. After clearing the channel, the receiver returns to the selection mode. Total time for channel selection is 29 seconds.
Remove all the selected channels: Disconnect the power socket and reconnect (the LED will flash slowly in the channel selection mode) then press and hold the OFF 'ALL ON / OFF' button until the LED flashes rapidly (about 3-4 seconds) This will mean that all selected ON / OFF channels have been removed. After all, the led will stop blinking.
Main features:
- Remote control socket 1 piece programmable + remote control + remote control battery
- Power supply: 230V, 50Hz
- Maximum load: 16 (2) A, 3600W
- Frequency of operation: 433.92MHz
- Range: about 30m in open space
- Remote control batteries: 2 AAA 1.5V (included)
Availability:
Available
Dispatched within: 5-7 working days
LogiLink USB-C Audio Adapter with 3.5mm TRSS Jack

Availability:
Low Stock
Dispatched within: 5-7 working days
Digitus Connection Cable UHD DP/DP DB-340201-030-S

Availability:
Available
Dispatched within: 5-7 working days
Qoltec Patchcord Fiber LC / UPC-LC UPC MM 50/125 OM3 15m

Availability:
Low Stock
Dispatched within: 5-7 working days