Adapter DisplayPort 1.1a miniDP-HDMI A MM 0.15m
DisplayPort 1.1a miniDP-HDMI Adapter A MM 0.15m, white.
The high quality digital audio and video connection cable is suitable for connecting MacBook, MacBook Air, MacBook Pro, iMac, Mac mini and other mini DP devices.
- Standard DisplayPort: DisplayPort 1.1a
- UL certificate: UL20276
- Plug housing: flooded
- Shielding: double shielding
- Material of the cable: CU
- Surface: nickel plated
- ferrite filter: none
- AWG: 32
Availability: Available
Dispatched within: 5-7 working days
Adapter USB to Serial ; Y-108
Unitek Y-108 converter USB to Serial
The adapter with a USB 2.0 port RS-232 is the easiest and cheapest way to connect devices using the RS-232 to USB port. The converter is designed especially for users of computers that are not equipped with a serial port for example. Installers and more demanding consumers are forced to connect RS-232 to USB 2.0 port on your computer.
Adapter based on the chip FT232R, which is a complete and fully configurable converter with USB 2.0 to RS232 / 422/485.
A characteristic feature of this device is a powerful customizable system controller.
- Y-108 converter
- CD plate
• Single chip USB to asynchronous serial data transfer
• Protocol USB is entirely controlled by one chipset
• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and bits of odd / even / mark / space / lack of parity
• Fully hardware or software (X-On / X-Off) negotiation signal.
• Data transfer rate of 300 baud to 3 Megabaud (RS422 / RS485 to TTL levels) and 300 baud to 1 Megabaud (232)
• Drivers FTDI's royalty-free VCP and D2XX
• Built-in support for trade events and conditions interrupt lines
• The new chipset USB FTDIChip-ID ™
• New configurable CBUS pins I / O
• Control Buffer automatic transmission for applications 485
• Signals transmission and reception for LEDs
• New timing of the output signals of 48MHz, 24MHz, 12MHz, and 6MHz clock output signal. Options for external MCU or FPGA.
• buffers transmit and receive FIFO for high throughput
• Adjustable time interval receive buffer
• Options synchronous and asynchronous bit bang mode signals goals RD # and WR #
• New option CBUS mode bit bang
• Integrated internal EEPROM 1024 Bit for storing configuration USB VID, PID, serial number and description of the device and CBUS I / O.
• The device is programmed with a unique serial USB
• Supports pause and resume for USB
• Supports configuration of USB power bus, its own power supply
• Integrated 3.3V level converter for USB I / O
• Integrated level converter on UART and CBUS for 5V - 1.8V
• Real output CMOS 5V / 3.3V / 2.8V / 1.8V and input TTL
• Option High I / O pin output drive
• Integrated USB resistors
• Integrated circuit power-on-reset
• Fully integrated clock - no external oscillator or resonator
• Fully integrated AVCC supply filtering - No external RC filter and separate pins AVCC
• Option inversion signal UART
• USB bulk transmission mode
• Power supply 3.3V to 5.25V
• Galvanic isolation of inputs / outputs.
• Low current
• Low bandwidth consumption USB
• Compatible with the host controller UHCI / OHCI / EHCI
• Compatible with USB 2.0
• Operating temperature range -40°C to 85°C
• Complies with the RoHS directive
• Windows Server 2008 R2
• Windows 7
• Windows 7 x64
• Windows Server 2008
• Windows Server 2008 x64
• Windows Vista
• Windows Vista x64
• Windows Server 2003
• Windows Server 2003 x64
• Windows XP
• Windows XP x64
• Windows 2000
• Windows ME
• Windows 98
• Linux
• Mac OS X
• Mac OS 9
• Mac OS 8
• Windows CE.NET (version 4.2 and higher)
Availability: Available
Dispatched within: 5-7 working days
Adapter DisplayPort to HDMI; Y-5118DA
Passive signal converter from Display port (DP) to HDMI port (F female)
- Data transfer rate: 2Gbps
- 20ps channel deviation with 2Gbps transfer
- Supported resolutions: up to 1920 x 1200 / 1080P
- Supported Display Port 1.1a standard
- Working temperature: from -45°C to + 85°C
NOTE: In order for the adapter to properly transmit audio through the HDMI connection, the graphics card of the computer must support digital audio output (Digital Output). If the graphic card does not have a digital audio output, only the image will be sent through the adapter.
Availability: Available
Dispatched within: 5-7 working days
Gembird Adapter HDMI-A(M)->VGA(F)
Adapter HDMI-A (M) -> VGA (F) on the cable
- Compact Converter
- Converts digital HDMI to analog VGA
- Supports resolutions up to 1920x1080 @ 60Hz compliant with HDMI version 1.4
- Resolution video output is the same as the input image
45 x 15 x 200mm
- Chipset: CH7101
Availability: Available
Dispatched within: 5-7 working days
ADAPTER DISPLAYPORT TO HDMI 4K; Y-6332 WHITE
Unitek Y-6332 is a converter that converts the signal from DisplayPort to HDMI and thus allows you to connect a signal source, eg. A computer or notebook with a DisplayPort port to the receiver, eg. A monitor or projector with HDMI input.
The converter supports 4K resolution - that supports devices with the best current image clarity and sharpness. With a resolution four times greater than Full HD the picture is crystal clear and sharp, providing a visual experience not inferior to reality. Connector is fully universal and connects devices of different brands.
- Supports handling 4K
- Complies with DP 1.2 and HDMI 1.4
- Chipset: ASM 1153
Availability: Available
Dispatched within: 5-7 working days
Gembird Video Adapter DisplayPort Mini(M)->HDMI(F)
Availability: Available
Dispatched within: 5-7 working days
Gembird Video Adapter HDMI-A(M) ->VGA(F)
Availability: Available
Dispatched within: 5-7 working days
Gembird Video Adapter DisplayPort 1.1(M)->VGA(F)
Availability: Available
Dispatched within: 5-7 working days
Adapter USB 1.1 do RS232 (COM) (Chipset: PL2303RA)
Adapter USB to RS232 is an easy way to connect via USB serial devices such as modems, PDAs, cash registers and other.
Special features of the device is a high level of compatibility and data transfer 1Mb/s.
- Efficient combination of serial devices through the USB port
- Supports RS232 serial interface
- Compliant with USB 1.1
- Data transfer rate 1Mb/s
- Supports functions: power management and "remote wake-up"
- Can be used in conjunction with weather stations, industrial equipment, set-top box, game consoles, receivers, cash registers and so on.
- Chipset: PL2303RA
- Length: 80cm (with attached extension cable)
- Supports Windows 8, 7, Vista, XP, Mac OS X and Linux
Availability: Available
Dispatched within: 5-7 working days
Gembird Adapter DVI-A Male to VGA 15-pin HD (3 rows) Female, black
Availability: Available
Dispatched within: 5-7 working days
LogiLinkAdapter Gigabit Ethernet to USB-C
Supported Operating Systems:
- Windows 07/08/10
- Mac OS X
- Linux
Availability: Low Stock
Dispatched within: 5-7 working days
HDMI male adapter for VGA female, black, 10cm
HDMI male adapter for VGA female, black, 10cm
- Converts digital HDMI signal to analog VGA
- Connects a digital video source to older analog displays with a VGA port
- No additional power supply required
- Very easy to connect - no configuration required
- Bandwidth of up to 165MHz / 1.65Gb / s HDMI port per channel (6.75Gb / s for all channels)
- Supports resolutions: 480p / 576p / 720p / 1080p
Availability: Low Stock
Dispatched within: 5-7 working days
SATA IDE bidirectional adapter
Bi-directional SATA/IDE converter
- GET MORE OUT OF YOUR PC
- Converts SATA to IDE and IDE to SATA
- Extend the life of your IDE devices
Features:
- Turns ‘older’ IDE devices into SATA devices
- Allows recent SATA devices to be connected to ‘older’ IDE host controllers
- Supports Serial ATA 1.0 interface with data transfer rates up to 150 MBytes/sec
- Supports all UDMA-33/66/100/133/150 IDE hard drives and most ATAPI devices
- Easy installation, no drivers required
Specifications:
- Native Hot-Swap and Plug & Play capability (non-boot device)
- Standard female IDE 40-pin connector
- Standard 7-pin Serial ATA connector
- Chipset: JM20330
- Dimensions: 52 x 48mm
- Net weight: 12g
Availability: Low Stock
Dispatched within: 5-7 working days
Gembird Adapter USB(M)+Power -> SATA Slim SSD
Adapter allows you to connect devices to the input 13-pin SATA to your computer via USB.
- Connector: Slim SATA 13 pin - USB 2.0-A male
- Works with devices equipped with SATA Slim 13 pin
- Cable length: 50cm
Availability: Available
Dispatched within: 5-7 working days
USB to serial RS232 converter, USB 2.0 (DB9M) FT232RL
The elegant way to connect serial devices like modems, PDA, etc. via USB. The high compatibility guarantees transfer rates from more than 1Mbps.
- Easy connection of serial devices through a USB port
- Supports RS232 serial interface
- Compliant with USB 2.0 standards
- Data transfer rates 1Mbps and more
- Support remote wake-up and power management
- Can be used for PDA, modems and much more serial devices
- Chipset: FTDI / FT232RL
- Incl. USB extension cable, ca. 80cm
- Supports Windows 8, 7, Vista, XP, Mac OS X and Linux
Availability: Available
Dispatched within: 5-7 working days
Adapter DisplayPort/HDMI M/Z
DisplayPort Adapter 20-pin connector <=> HDMI Type A (19-pin) Socket
Plug and Play
HDCP 1.0, 1.1 and DPCP support
Availability: Available
Dispatched within: 5-7 working days
Gembird Adapter HDMI (F) -> DVI (M), gold-plated
Adapter for connecting equipment with DVI to HDMI
- (female plug) 19 pin HDMI -> DVI 18 +1 pin (male plug)
Availability: Available
Dispatched within: 5-7 working days
LogiLink USB 2.0 to Serial Port Adapter
USB 2.0 adapter for serial port on FTDI FT232RL chipset
- USB extension cord
- Bracket with screws
Availability: Available
Dispatched within: 5-7 working days
Gembird Adapter Displayport(M)-> HDMI-I(F)(24+5) 10cm
Adapter lets you connect devices with DisplayPort devices equipped with HDMI connector, using a cable.
- Interface: DisplayPort v1
- Resolution: up to 1920 x 1200 x 60Hz
Availability: Low Stock
Dispatched within: 5-7 working days
Gembird Adapter Displayport(M)-> DVI-I(F)(24+5) 10cm
Adapter digital image: DisplayPort male to DVI female
Adapter allows you to connect to the source display port monitor receiver with DVI.
- Interface: DisplayPort v1
- Resolution: up to 1920 x 1200 x 60Hz
Availability: Available
Dispatched within: 5-7 working days
ADAPTER MINI DISPLAYPORT TO HDMI 4K; Y-6331
Overview:
Y-6331 is a converter which converts Mini DisplayPort to HDMI, which enables you to connect any HDMI interface embedded device (e.g.: monitor, projector etc.) with a Mini DisplayPort interface (e.g.: desktop computer, laptop, ultrabook etc.) without the necessity to purchase a Mini DisplayPort embedded terminal device. This converter supports 4K resolution - the next generation of clarity. With 4 times the resolution of Full HD, pictures have never been so crisp and every detail is sharp even on bigger displays. It makes everything you watch a spectacular experience. And with a continuously growing range of 4K content, every frame will draw you in with beautifully riveting detail.
Features:
- A converter which enables you to convert Mini DisplayPort to HDMI.
- Compatible with almost all of the displays, TVs, projectors and many more.
- With DP1.2 standard, HDMI1.4 specification.
- Plug and play, no need to install a driver, easy to use.
- Supports handling 4K
- Complies with DP 1.2 and HDMI 1.4
- Chipset: ASM 1153
Availability: Available
Dispatched within: 5-7 working days
CAT 5e, Class D, RJ45 Patch Cable Adapter, shielded
- Assignment: 1-1, 2-2, 3-3, 4-1, 5-2, 6-6, 7-3, 8-6
- 2x RJ45 Female to 1x RJ45 Male
- Length 0.19m
- Material enclosure: ABS non halogen, UL 94 V0
- Material surface: Copper with shining Nickel
- Material PCB: FR4, 1,2mm thickness
- Material IDC Terminal: Phosphor Bronze with 50µ Tin plated over 60µ Nickel plated
- Mating cycles: ≥ 750
- Operating temperature: -40°C ~ +80°C
Availability: Available
Dispatched within: 5-7 working days
i-tec USB-C do Display Port kabel/adapter
Availability: Available
Dispatched within: 5-7 working days
LogiLink Bluetooth Adapter v4.0 USB, Win 10
Availability: Available
Dispatched within: 5-7 working days
Gembird USB AM-AF 2.0 Extension Cable with Ferrite 4,5m
Producer number
CCF-USB2-AMAF-15
Poduct name
Gembird USB AM-AF 2.0 Extension Cable with Ferrite 4,5m
Producer
Gembird
Product class
Cable - USB | FireWire | PS/2 | (e)SATA | ATA
Availability: Available
Dispatched within: 5-7 working days
USB3.0 to IDE/SATA II CONVERTER; Y-3324
Universal and multifunctional
Unitek Y-3324 is a USB 3.0 adapter for IDE devices (2.5" and 3.5") and SATA devices. It gives the possibility of connecting 2.5" and 3.5" HDD and SSD hard drives of any capacity. Allows simultaneous operation of three connected drives, both IDE and SATA.
Plug & Play
Unitek Y-3324 does not need any drivers. Just connect it and it is ready for action immediately. Data transfer is fast and stable. The device has an on / off button on the rear panel. It also has a Sleep function that automatically puts the device to sleep after 30 minutes of inactivity. This feature extends the life of hard drives connected to it.
99 x 73 x 17mm
Availability: Low Stock
Dispatched within: 5-7 working days
Adapter USB C-HDMI and USB function Power Delivery
Organize your work area to fully meet your expectations.
Use the new USB-C or Thunderbolt 3 connectors to connect peripherals to your notebook, tablet, PC or smartphone. Take advantage of the ability to connect an external HDMI monitor, projector, or TV with HDMI. The adapter supports 4K Ultra HD resolution up to 3840x2160 @ 30Hz and stereo sound. The adapter offers 2x USB 3.0 ports for standard USB 3.1 / 3.0 / 2.0 and high data transfer rates (5Gbps), 1x NEW USB-C Power Delivery port for charging your notebook, tablet or smartphone with Power Delivery.
You can connect an original or universal USB-C power adapter to this port and keep your notebook, tablet or smartphone fully charged while you work. This port can also be used to transfer data when connecting devices with a USB-C connector (eg Ethernet adapter, USB Flash Disk).
Port does not allow video transfer. The adapter is compatible with the MacBook Pro 2016, MacBook 2015, Chromebook Pixel 2015, Acer Switch Alpha 12, Dell XPS 13, HP EliteBook Folio G1, ASUS UX390UAK and other USB-C devices. The new USB-C connector has many advantages. It is smaller and symmetrical, allows you to insert any page. The adapter is comfortable when traveling due to its small dimensions and weight. Drivers install automatically when connected for the first time.
90 x 58 x 14mm
- i-tec USB-C adapter with cable (13cm)
- Quick Start
SYSTEM REQUIREMENTS:
- Hardware requirements: Notebook, tablet, PC or smartphone with OS Windows, Mac or Google with free USB-C port with "DisplayPort Alternate Mode" and "Power Delivery" or Thunderbolt Port 3
- Operating System: Windows 10, Mac OS X, Google (Chrome OS and Android 6)
Availability: Low Stock
Dispatched within: 5-7 working days